Pages

2.17.2012

Fixing Deck Rails on Porches, Decks, etc

One of my latest repair projects:


  • The 2nd Floor deck support rail was leaning away from the building creating a Safety Issue for anyone who leaned on the Support Rail.  
  • I used a Ratcheting Tie Down Strap to pull the deck support rail straight.  (In the following diagram you will see the connection points for Plumbing up the deck rail on the 2nd Story Deck.)
  • After the Support Rail was re-plumbed I reattached the connection point at the Buildings Masonry wall with 4- 3/8 x 5 1/2 Lags and Masonry Anchors, spaced at 8in OC.


Apply Tension and Pull Towards Building


Scotty Adding 3" Deck Type Screws to Secure Support Rail to Deck
  • I also replaced the original nails that had pulled loose with 3" Deck Screws
  • I then added a 2x4x14' to hold the Deck Rail into position.  (See Action Photo Above)


Anchor to Wall w/ Lag Screws and Concrete Anchors




Thank you for stopping by St Louis Renewable Energy. Feel free to comment in the section below or contact Scotty for any Home Improvement Projects or Energy Reducing Needs and Scotty, Scotts Contracting will respond ASAP.

No comments:

Post a Comment

Post your Comments Below. Spam comments will not be published. webmasters do not store, sell, or spam your email address. Feel Free to You use HTML tags, KEEP IT GREEN, Dont Spam