TPO Roof - NO Touch Electric Ground Wire Installation

TPO Roof - NO Touch Electric Ground Wire Installation

A prototype CAD design has been created with SketchUp and uploaded as a Free Share / Open Source Design in the 3D warehouse

GAF TPO EverGuard 'strips" were fashioned around the Ground Wire attached to the rooftop communication equipment (Cable, Satellite, and Internet Antennas).  To keep the wire from rubbing holes in the roofing when the wind blows or from rain storms.  TPO strips (1in by 5in) were modified and welded to the existing TPO Roof surface to hold the Ground Wire 1 inch off the roof.  The modified NO Touch Electric Ground Wire attachments were placed 12 to 16 inches apart.

Ground Wire is held off the roof 1 inch with a 1in x 5in EverGuard TPO Strip-The TPO Roof will always be protected from the Ground Wire Rubbing a future hole in the Roof.
Installation Video see Green Blog: https://t.co/00PI08ZKJT pic.twitter.com/KTfShXLxbF

— Scotty (@StLHandyMan) April 12, 2019

#FreeShare White #TPO CAD Roof Detail-St Louis Flat Roof Brick Wall
WhiteRoofs save money + reduce Heat-island effect. #StLouis pic.twitter.com/ICCQO0aAAF

— Scotty (@StLHandyMan) April 11, 2017

Thank You for stopping by the Green Blog. If additional information in needed or you have a question let me know by posting a question or comment. Together we can make a difference and create a future that will benefit everyone.