Design Build Loft CAD designs with Build Notes

Design Build Energy Efficient Loft Home Design CAD drawings and Build Notes for Brick Home LEED Rated Project:

• Exposed Brick Interior Walls- Soulard Red Mortar
• 2nd Floor Loft Railings will reflect the design chosen for the finishes- Modern, Rustic, Traditional, etc.
• Fireplace, Mantle, Smoke Stack- Final Design chosen to match existing finishings and the exposed brick walls.
• 3 Bedroom
• Master Bed w/Bath ea floor
• 2 Full Bath,
• 2-1/2 bath,
• Open Floor Plan-Kitchen,
• Utility Room,
• Dining,
• Great Room,
• 1st Floor Sun Room/Study,
• 2nd Floor Office/Spare Bedroom,
• 2nd Floor Deck,

• 

  Design Build Energy Efficient Loft Home Design CAD drawing

  
  

I propose:

• Make Fireplace focal point of front room and second floor Loft Area
• Loft removing 1/2 of the front room ceiling and floor system.
• This opens the entire floor plan up and gives options for incorporating fireplace, mantle, and smoke stack up the wall for Vertical Appeal.
• 2 Draw Backs to this design: 
• a: it is not as energy efficient to have ceilings that tall, windows that large and numerous. 
• b: the size of the opening is about the size of a bedroom.  So you lose a bedroom.

• On the Adjacent Wall- copy the existing design of where the Glass Block in the 1st Floor to Ceiling.  Directly above- copy and build this set up into the 2nd Floor as well.  This will tie the vertical space together. 
• Glass Block or:
• Stained Glass- would or could also be used for accent options.
• Since the existing flooring is damaged in the center of the room on the first floor; I also suggest to incorporate a design into the floor as an accent in front of the fireplace.  Matching the existing floor could prove to be a challenge- here's an example
• If you choose to use the fireplace for more than looks and for actual heating purposes, it wouldn't be too big of a deal to channel that hot air back into the rooms.

Energy Efficiency:

• Exposed Brick walls have little to no insulation value.
• If insulation is desired you have to insulate the outside or build walls on the inside.
• I have additional energy saving design tricks for brick walls up my sleeve that I will share at a later date.
• I say sacrifice the R Value for Koolness factor,
• To combat the energy loss from the walls means that whatever makes the heat needs to run cheap and use no fossil fuels.
• Geothermal is my first choice,
• Solar w/ Instantaneous is 2nd choice
• Full Insulation in Attic/Ceiling as well as
• Basement Walls and Ceiling (full ins)
• Geothermal Infloor heating or radiant floor heating with electric are heating options to minimize the HVAC heating.
• Fireplace- Emergency use or heating choice (high efficiency insert into a fireplace for increased energy efficiency- could be ducted into existing hvac ducts and used to heat home.)

Thank You for stopping by-Share and Comment below. If additional information in needed or you have a question let me know. Together we can make a difference. Build a Green StLouis Green Building Tips and Resources from Scotty-St Louis Renewable Energy Green Blog
-->