Amazing Tools That Are On Another Level ▶17

Construction Tip #72138 RevoR322 Tool Review

Today while working on another set of these beautiful Modern Stairs it was suggested to use the Revo Magnetic Drill to bore the holes in the 1/4 inch angle- steel stair-frame support.

This is an unpaid and not sponsored tool review of the RevoR322 Compact Electromagnetic Drilling System.   I'm sharing this information because I was so impressed with the tool. Scotty 10/28/2015

Set it against the metal, flipped the switch- it stuck like chuck! ElectroMagnetic Drill https://t.co/Yv0LeEM8bg pic.twitter.com/9JaqvQT3uj

— Scotty (@StLHandyMan) October 29, 2015

Beautiful Modern Stairs

I heard the Welders talking about the new tool on lunch break early this week:  

  Magnetic Drill and how it made drilling in steel easy-peasy.

Today I got my chance to use the RevoR322 and I was very impressed to say the least.

1. I opened up the kool case. 
2. Did not read the instructions- maybe they weren't in the storage case?
3. Could easily tell what part went where, because the Welder told me: "The Magnetic Drill was actually a miniature drill press."
4. Three screw in handles went in the obvious spot on the side of the drill- see first picture.
5. Put a 3/8 drill bit into the drill and tightened it down with the supplied chuck.
6. Plugged it in to 110v circuit. 
7. Set it against the metal, flipped the switch and it stuck like chuck!
8. I was amazed that it supported its own weight for as heavy as it is!
9. After a few try outs using an electro magnet for the first time- I positioned the Revo for its first hole.
10. Push button drill to start (and stop) was a handy feature.
11. Two Hands were required for operation: One hand dribbled the cutting oil onto the drill bit and the other rotated the drill press handles (see 1st picture)
12. The Revo Magnetic drill held itself onto the metal and in the position I placed it, eliminating the need for me to perform 3 actions at the same time: Hold the Drill, Dribble the Cutting Oil, and Operate the Drill Press.
13. I drilled a dozen holes with little to no effort.  Once the Revo Drills electric button is turned on.  It does not need any additional assistance holding itself in place.  And its a heavy drill.  Very Impressive.
14. I felt it drilled the 3/8 inch holes as fast as a stand-up drill press would.
15. I never lacked for power and made this phase of the staircase build virtually effortless when compared to drilling a dozen holes with my 18v cordless Ridgid hand drill.
16. I do not know how it will do with bigger holes.   I had no trouble with the 3/8 inch holes.
17. It works and made the out of position drilling easy-peasy.
18. I noticed that when the WD40 I was using as cutting oil ran down onto the electromagnets while attached to the steel: The Drill did not loose its grip on the metal and stayed in position. 
19. You can feel the electromagnet pulse in the steel: very, very slight vibration or pulse-weird feeling is all- doesn't shock or hurt in anyway, just weird feeling.
20. I did not try to over torque the drill while drilling the holes to test its powerful magnet.

Yes I would recommend this tool for drilling in steel. 

Set it against the metal, flipped the switch, and it stuck like chuck!
RevoR322 Compact ElectroMagnetic Drill Press

 I positioned the RevoR322 Magnetic Drill for the first hole.

Drill stopped halfway thru the bore hole to take this picture

Self Supporting Magnetic Drill-RevoR322 

Building Custom Modern Staircases is a small part of a Green Build Renovation Project located in Downtown StLouis Missouri -

 See more at: http://blog.stlouisrenewableenergy.com/#sthash.kgd745vV.dpuf

#ConstructionTip I used this Kool Magnetic Drill Press on the Jobsite> I was impressed to say the least! #RevoTools pic.twitter.com/o65xbHQp1j

— Scotty (@StLHandyMan) October 29, 2015

Thank You for stopping by-Share and Comment below. If additional information in needed or you have a question let me know. Together we can make a difference and create a future that will benefit everyone. Build a Green StLouis Green Building Tips and Resources via: Scotty- St Louis Renewable Energy Green Blog
-->