-- Scotts Contracting - StLouis Renewable Energy

Search This Blog

8.02.2010

Renewable Energy Feed-in Tariffs in the U.S.

Analysis of Renewable Energy Feed-in Tariffs in the U.S.


The National Renewable Energy Laboratory (NREL) has published a report analyzing the impacts that state level feed-in tariff policies can have on the renewable energy industry across the country. The report uses data and reports from around the world to highlight the various benefits that a feed-in tariff type of policy can have on renewable energy development.

A feed-in tariff is an energy policy that provides for a guarantee of payment to renewable energy developers for the energy that is produced. This type of policy can be thought of as an advanced form of a production-based incentive because payments are made for the actual electricity produced and not for how much capacity is installed. The most common feed-in tariff payment is based on the actual levelized cost of renewable energy generation. This method of payment provides a price adequate to ensure a reasonable rate of return on for investors.
The authors of the report delve into the various advantages of feed-in tariff policies and the number of challenges to implementing feed-in tariff policies in the U.S. The report also provides a review of the current state-level and utility-level feed-in tariff policies that are currently in place across the county and compares them with the successful models found in Europe. These states include Gainesville, Florida; various Wisconsin utilities; California; Vermont (report was written prior to passage of the state-wide feed-in tariff so this analysis focuses on the two utility-specific programs); Washington; and Oregon. The authors wrap up the report with a discussion of best practices for feed-in tariff policy design and implementation, followed by an analysis on how to use a feed-in tariff policy to achieve state renewable energy goals.
The authors highlight one of the most important elements of a feed-in tariff policy - that it allows for more participants in renewable energy project development. In their analysis the authors state that there are significant impacts of a feed-in tariff on developing community ownership, but it will depend on how the program is structured and payments determined.
You can read the full report here (PDF).














Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

Wind Power Financing

Here is a Web Site that will assist you in determining if Generating Electricity from Wind will work for you.

A wind energy power project is an electricity generation investment that produces electricity at an average cost of electricity that is based on technology, location and financial assumptions.

In this application you create new (or modify an existing) project by entering values for numerous assumptions step-by-step, until enough information has been entered to calculate the project's cost of electricity.

The projects that you add or modify will be stored for your convenience and will be available to you the next time you login. An asterisk at the end of a project name means that the project is visible to all users and cannot be modified by a single user.


Start Here>http://analysis.nrel.gov/windfinance/default.asp

--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

Rep Jay Inslee-AMP Act

Americans Making Power Act Proposes National Net Metering

Washington, D.C. - Rep. Jay Inslee (WA) has introduced the Americans Making Power Act, or AMP Act, which would establish a national standard for net metering. The legislation would allow Americans to feed back into the grid excess renewable power they generate through their homes, small businesses and even places of worship. This legislation would also improve reliability of the nation's electric grid by encouraging a more diffuse means of energy production.

"Our new clean energy economy can start right at home."

—  Rep. Jay Inslee

The AMP Act (HR 5692) addresses two main issues associated with a robust net metering policy; namely the actual net metering standard and a policy component designed to allow for the connection of a renewable energy system to the electric grid, also known as "interconnection." The AMP Act would accomplish this by modifying section 113 of the Public Utility Regulatory Policies Act (PURPA) of 1978. While some 42 states have already adopted some form of net metering and/or interconnection standards, there are many variations in policy and some states have yet to adopt net metering language at all.

The AMP Act would set a minimum in standards and procedures for net-metering including a limit on the size of machine at 2MW, but would allow states to enact their own regulations over and above this minimum. As written, the owner-generator keeps all renewable energy credits generated by the machine. Additionally, the requirement to offer this program does not apply once the utility has reached a total of 6% of its peak load in net-metered projects (or 4% of it's peak by any one qualifying net-metered technology). This is re-calculated every 12 months. Customer-generators will receive a kwh credit on their bill for any excess generation. At the end of 12 months, if there is a net excess of generation, the customer-generator recieves a payment equal to the average wholesale rate for the previous 12-month period per net excess kwh.

"Our new clean energy economy can start right at home," said Rep. Inslee. "By empowering Americans, this legislation can help build the clean energy economy of the 21st century while saving families money. Imagine getting a credit on your bill from your utility company every month because you generated more power than you use."



--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

Wind Energy Info-Wind Basics Series

Learn About Wind Energy

Welcome to our Wind Basics series! 

Use the Wind Basics series to learn the basics of wind energy and putting up a turbine. Topics in this series are:

Use our FAQs (Frequently Asked Questions) to find answers to common questions about wind.

Use the Glossary to understand unfamiliar terms.



--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

Connect with Scotts Contracting

FB FB Twitter LinkedIn Blog Blog Blog Blog Pinterest

Featured Post

How Two Friends Turned Abandoned CASTLE into a 4☆HOTEL | by @chateaudut...

Join us on an extraordinary journey as two lifelong friends, Francis and Benoit, turn a crumbling, centuries-old castle into a stunning 4-st...