-- Scotts Contracting - StLouis Renewable Energy

Search This Blog

9.09.2010

Fossil Fuel Pollution vs Wind Energy Emissions

With the Energy Sectors Competing for our Energy Dollars many Un-truths are being levied by the Fossil Fuel Organizations.  In the Following Article the Author explains that Wind Energy Emissions is Truly Green Energy Production with no Harmful Emissions. Build Green, Scotty


The Facts About Wind Energy and Emissions

Anti-wind groups are attempting to defy the laws of physics with their claims.
Published: September 1, 2010
Washington, DC, United States -- Recent data and analyses have made it clear that the emissions savings from adding wind energy to the grid are even larger than had been commonly thought. In addition to each kilowatt-hour (kWh) of wind energy directly offsetting a kWh that would have been produced by a fossil-fired power plant, new analyses show that wind plants further reduce emissions by forcing the most polluting and inflexible power plants offline and causing them to be replaced by more efficient and flexible types of generation.
At the same time, and in spite of the overwhelming evidence to the contrary, the fossil fuel industry has launched an increasingly desperate misinformation campaign to convince the American public that wind energy does not actually reduce carbon dioxide emissions. As a result, we feel compelled to set the record straight on the matter, once and for all.
Fossil Fuel's Desperate War against Facts
Not to be deterred by indisputable data, numerous refutations, or the laws of physics, the fossil fuel lobby has doubled down on their desperate effort to muddy the waters about one of the universally recognized and uncontestable benefits of wind energy: that it reduces the use of fossil fuels as well as the emissions and other environmental damage associated with producing and using these fuels.
For those who have not been following this misinformation campaign by the fossil fuel industry, here is a brief synopsis. Back in March 2010, AWEA heard public reports that the Independent Petroleum Association of Mountain States (IPAMS), a lobby group representing the oil and natural gas industry, was working on a report that would attempt to claim that adding wind energy to the grid had somehow increased power plant emissions in Colorado.

Perplexed at how anyone would attempt to make that claim, AWEA decided to take a look at the relevant data, namely the U.S. Department of Energy's data tracking emissions from Colorado's power plants over time. The government's data, reproduced in the table below, show that as wind energy jumped from providing 2.5% of Colorado's electricity in 2007 to 6.1% of the state's electricity in 2008, carbon dioxide emissions fell by 4.4%, nitrogen oxide and sulfur dioxide emissions fell by 6%, coal use fell by 3% (571,000 tons), and electric-sector natural gas use fell by 14%. (Thorough DOE citations for each data point are listed here (PDF).) Two conclusions were apparent from looking at this data: 1. the claim the fossil fuel industry was planning to make had no basis in fact, and 2. the fossil industry was understandably frustrated that they were losing market share to wind energy.

Change in Colorado Power Plant Fossil Fuel Use and Emissions from 2007-2008, as Wind Jumped from Providing 2.5% to 6.1% of Colorado Electricity

In early April, AWEA publicly presented this government data, and when the fossil fuel lobbyists released their report later that month it was greeted with the skepticism it deserved and largely ignored. Case closed, right? We thought so, too.


After the initial release of the report fell flat, the fossil fuel industry tried again a month later. John Andrews, founder of the Independence Institute, a group that has received hundreds of thousands of dollars in funding from the fossil fuel industry, penned an opinion article in the Denver Post parroting the claims of the original report. Fortunately, Frank Prager, a vice president with Xcel Energy, the owner of the Colorado power plants in question, responded with an article entitled "Setting the record straight on wind energy" that pointed out the flaws in the fossil industry's study and reconfirmed that wind in fact has significantly reduced fossil fuel use and emissions on their power system. Having been shot down twice, we thought that the fossil industry would surely put their report out to pasture.

Yet just a month later the report resurfaced, this time in Congressional testimony by the Institute for Energy Research, a DC-based group that receives a large amount of funding from many of the same fossil fuel companies that fund the Independence Institute. The group has continued trumpeting the report's myths at public events around the country and on their website, and these myths are now beginning to spread through the pro-fossil fuel blogosphere. In recent days, these myths have re-appeared in columns by Robert Bryce, a senior fellow at the fossil-funded Manhattan Institute.

The fossil fuel industry's desperate persistence and deep pockets make for a dangerous combination when it comes to distorting reality, so we'd like to once and for all clarify the facts about how wind energy reduces fossil fuel use and emissions.

The Truth about Wind and Emissions

The electricity produced by a wind plant must be matched by an equivalent decrease in electricity production at another power plant, as the laws of physics dictate that utility system operators must balance the total supply of electricity with the total demand for electricity at all times. Adding wind energy to the grid typically displaces output from the power plant with the highest marginal operating cost that is online at that time, which is almost always a fossil-fired plant because of their high fuel costs. Wind energy is also occasionally used to reduce the output of hydroelectric dams, which can store water to be used later to replace more expensive fossil fuel generation.

Let's call this direct reduction in fossil fuel use and emissions Factor A. Factor A is by far the largest impact of adding wind energy to the power system, and the emissions reductions associated with Factor A are indisputable because they are dictated by the laws of physics.

In some instances, there may also be two other factors at play: a smaller one that can slightly increase emissions (let's call it Factor B), and a counteracting much larger one that, when netted with B, will further add to the emissions reductions achieved under Factor A (let's call this third one Factor C).

Factor B was discussed at length in an AWEA fact sheet (PDF) published several years ago. This factor accounts for the fact that, in some instances, reducing the output of a fossil-powered plant to respond to the addition of wind energy to the grid can cause a very small reduction in the efficiency of that fossil-fueled power plant. It is important to note that this reduction in efficiency is on a per-unit-of-output basis, so because total output from the fossil plant has decreased the net effect is to decrease emissions.

As a conservative hypothetical example, adding 100 MW of wind energy output to the grid might cause a fossil plant to go from producing 500 MW at 1000 pounds of CO2 per megawatt-hour (MWh) (250 tons of CO2 per hour) to producing 400 MW at 1010 pounds of CO2/MWh (202 tons of CO2 per hour), so the net impact on emissions from adding 100 MW of wind would be CO2 emissions reductions of 48 tons per hour. Unfortunately, fossil-funded groups have focused nearly all of their attention on Factor B, which in this example accounts for 2 tons, while completely ignoring the 50 tons of initial emissions reductions associated with Factor A. (See Footnote 1.) A conservative estimate is that the impact of Factor B is at most a few percent of the emissions reductions achieved through factor A.

Factor C is rarely included in discussions of wind's impact on the power system and emissions, but the impact of Factor C is far larger than that of Factor B, so that it completely negates any emissions increase associated with Factor B. Factor C is the decrease in emissions that occurs as utilities and grid operators respond to the addition of wind energy by decreasing their reliance on inflexible coal power plants and instead increase their use of more flexible – and less polluting – natural gas power plants. This occurs because coal plants are poorly suited for accommodating the incremental increase in overall power system variability associated with adding wind energy to the grid, while natural gas plants tend to be far more flexible. (Footnote 2)

To summarize, the net effect of Factors A, B, and C is to reduce emissions by even more than is directly offset from wind generation displacing fossil generation (Factor A).

Study after Study

Unsurprisingly, government studies and grid operator data show that this is exactly what has happened to the power system as wind energy has been added. A study by the National Renewable Energy Laboratory (NREL) released in January 2010 found drastic reductions in both fossil fuel use and carbon dioxide emissions as wind energy is added to the grid. The Eastern Wind Integration and Transmission Study (EWITS) used in-depth power system modeling to examine the impacts of integrating 20% or 30% wind power into the Eastern U.S. power grid.

The EWITS study found that carbon dioxide emissions would decrease by more than 25% in the 20% wind energy scenario and 37% in the 30% wind energy scenario, compared to a scenario in which our current generation mix was used to meet increasing electricity demand. The study also found that wind energy will drastically reduce coal generation, which declined by around 23% from the business-as-usual case to the 20% wind cases, and by 35% in the 30% wind case.

These results were corroborated by the DOE's 2008 technical report, "20% Wind Energy by 2030," which also found that obtaining 20% of the nation's electricity from wind energy would reduce carbon dioxide emissions by 25%.The fact that this study found emissions savings to be even larger than the amount directly offset by adding wind energy is a powerful testament to the role of Factor C in producing bonus emissions savings. By running scenarios in which wind energy's variability and uncertainty were removed, NREL's EWITS study was able to determine that it was in fact these attributes of wind energy that were causing coal plants to be replaced by more flexible natural gas plants. (See page 174 of the study.)

As further evidence, four of the seven major independent grid operators in the U.S. have studied the emissions impact of adding wind energy to their power grids, and all four have found that adding wind energy drastically reduces emissions of carbon dioxide and other harmful pollutants. While the emissions savings depend somewhat on the existing share of coal-fired versus gas-fired generation in the region, as one would expect, it is impossible to dispute the findings of these four independent grid operators that adding wind energy to their grids has significantly reduced emissions. The results of these studies are summarized below.

Independent Grid Operators' Calculations of Wind's Emissions Savings

It is even more difficult to argue with empirical Department of Energy data showing that emissions have decreased in lockstep as various states have added wind energy to their grids. In addition and in almost perfect parallel to the Colorado data presented earlier, DOE data for the state of Texas show the same lockstep decrease when wind was added to its grid. This directly contradicts the Independent Petroleum Association of Mountain States report when it attempts to claim that wind has not in fact decreased emissions in Texas.

Specifically, DOE data show that wind and other renewables' share of Texas's electric mix increased from 1.3% in 2005 to 4.4% in 2008, an increase in share of 3.1 percentage points. During that period, electric sector carbon dioxide emissions declined by 3.3%, even though electricity use actually increased by 2% during that time. Because of wind energy, the state of Texas was able to turn what would have been a carbon emissions increase into a decrease of 8,690,000 metric tons per year, equal to the emissions savings of taking around 1.5 million cars off the road.

A Time for Change
The fossil fuel industry's latest misinformation campaign is reminiscent of scenes that played out in Washington in previous decades, as tobacco company lobbyists and their paid "experts" stubbornly stood before Congress and insisted that there was no causal link between tobacco use and cancer, despite reams of government data and peer-reviewed studies to the contrary. It's time we enacted the strong policies we need to put our country's tremendous wind energy resources to use, creating jobs, protecting our environment, savings consumers money, and improving our energy security, even if it means leaving a few fossil fuel lobbyists behind.

Michael Goggin is electrical industry analyst at AWEA.

Footnotes:
Mr. Bryce's recent Wall Street Journal article is the most creative in its effort to exaggerate Factor B and downplay factor A. In his article, Bryce exclaims about the "94,000 more pounds of carbon dioxide" that the IPAMS study claimed were emitted in Colorado due to Factor B. To be clear, 94,000 pounds is equivalent to the far less impressive-sounding 47 tons of carbon dioxide, or the amount emitted annually on average by two U.S. citizens. Yet just a few paragraphs later, Mr. Bryce speaks dismissively when noting a DOE report that found that, on net, wind energy would "only" reduce carbon dioxide by 306 million tons (enough to offset the emissions of about 15 million U.S. citizens).

2 It is important to keep in mind that the supply of and demand for electricity on the power system have always been highly variable and uncertain, and that adding wind energy only marginally adds to that variability and uncertainty. Electric demand already varies greatly according to the weather and major fluctuations in power use at factories, while electricity supply can drop by 1000 MW or more in a fraction of a second when a large coal or nuclear plant experiences a "forced outage" and goes offline unexpectedly, as they all do from time to time. In contrast, wind output changes slowly and often predictably.

[Editor's note: Footnotes 3-11 are embedded as links into the text above.]

Chart Footnotes:
12 Texas ERCOT Study (PDF)
13 Transmission Expansion Plan, Vision Exploratory Study, Midwest ISO (2006)
14 Mid-Atlantic Study (PDF)
15 New England Study (PDF)

This article first appeared in the August 2010 issue of Windletter and was republished with permission from the American Wind Energy Association (AWEA).
The information and views expressed in this article are those of the author and not necessarily those of RenewableEnergyWorld.com or the companies that advertise on its Web site and other publications.


--
Scott's Contracting
scottscontracting@gmail.com
http://stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com

Smart Grid Innovation-Distributed Control Applications

Echelon transforms the electric grid with intelligent distributed control applications


Source: Echelon Corporation

Echelon Corporation (NASDAQ:ELON) unveiled the Echelon Control System (ECoS), a new open software platform for intelligent distributed control of the smart grid. The announcement was made at a special event with industry consultants, such as KEMA, and Echelon customers and partners including Duke Energy, Oracle, SEAS-NVE, and Telvent. ECoS will run throughout the edge of the grid on the new Edge Control Node (ECN) 7000 series of open and extensible hardware solutions. Echelon also announced that Duke Energy will be the first customer for the ECoS. 

"ECoS and the ECN 7000 family represent an important step forward for Echelon as a company and the smart grid as an industry," said Ron Sege, President and CEO of Echelon. "ECoS will move the grid beyond centralized reading of meters to a truly open, intelligent and distributed system that can monitor and react to an increasingly dynamic and demanding environment. Even as demand for electricity grows and its supply becomes increasingly distributed, utilities can now enhance customer experience through improved reliability, accelerated response times and increased efficiencies. We are excited by this vision and extremely pleased at the strong interest among our customers and partners." 

Built on Echelon's 20 years of proven, trusted and unmatched experience in control networking and software innovation, ECoS provides an open and secure application framework for monitoring and controlling devices at the edge of the grid – the critical point where the distribution network connects to customers. ECoS enables developers to easily build applications, or "ECoS apps," to make local, autonomous control decisions in near real-time for maximum reliability, survivability and responsiveness. 

For example, utilities have minimal warning of outages because they cannot completely monitor the conditions on the grid that can cause these service interruptions. With ECoS and the ECN, utilities have unprecedented visibility at the edge of the grid, so anomalies like voltage fluctuations, power quality and line signal strength can be quickly identified, giving utilities the potential to see where their next outage may strike and take corrective action before it occurs. 

With investment in one open platform, ECoS allows utilities to meet next generation demand response challenges, optimize local grid efficiency, predict power outages before they occur and rapidly restore service, and implement other smart grid services. In a separate news release, Echelon announced today that Duke Energy will be the first customer for the ECN 7000 series. 

"Like all utilities, we are seeing new demands placed on the grid from the increased number of intermittent generation sources, such as wind power, and the introduction of electric vehicles," said Peter Iversen, CTO at SEAS-NVE, the second largest utility in Denmark. "By distributing intelligent control into the grid, ECoS and the ECN 7000 will raise system reliability and survivability to the next level by eliminating central points of failure and vulnerability. ECoS will deliver the near real-time responses utilities need to increase efficiency, create balance and increase our control at the edge of the grid." 

"The ECoS software platform and Edge Control Node 7000 provide an applications and data sharing model that complements Oracle's smart grid solutions," said Guerry Waters, Vice President, Industry Strategy and Marketing, Oracle Utilities. "Sensing, control and intelligence distributed throughout the grid will help utilities to serve their customer's needs – with the reliability, efficiency, scalability, and security essential to the smart grid." 

Ignacio González, CEO at Telvent, remarked, "From our view, the ECoS and the ECN series of products will clearly compliment the already successful relationship we have with Echelon in providing integrated smart metering, smart network and smart operations solutions for our customers. Combined with Telvent's advanced SCADA, DMS, Meter Data Management, GIS, Outage Management solutions and substation automation products, customers can realize significant efficiency, reliability and security improvements in their operations while meeting pressing smart metering program objectives. Echelon's ECoS powered products provide a welcome open, modular framework that can be used to create an innovative and cost effective utility smart grid applications for now and the future."



--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

Gearless Wind Turbine Innovation

Statoil tests innovative gearless turbine at world's northernmost offshore wind farm


Source: Statoil 

In the world's northernmost wind farm at Havøygavlen, Statoil is to test next generation turbine technology. The innovation is a gearless turbine that promises to achieve significant reductions in operation and maintenance costs for offshore wind power. 

One of the biggest challenges with developing offshore wind power is the major cost involved in repairs and maintenance out at sea.

"If an offshore wind turbine breaks down, there are many factors contributing to increased downtime compared with a land-based turbine," explains operations manager for wind energy in Statoil, Sverre Trollnes.

Increased reliability

According to Trollnes, a common cause of problems with today's turbines has been lack of robust design and component selection.

Statoil's supplier Siemens has developed a gearless turbine that represents a major step forward in the simplification of the technology – and which promises to reduce maintenance by 20%.

Siemens are now manufacturing a trial series of 10 wind turbines – and one of these is earmarked for Statoil's wind farm at Havøygavlen, as part of Statoil's initiative 'Bringing cost of offshore wind down.'

Land-based trial

The goal of the programme is to qualify the technology for developing offshore projects, primarily the gigantic Dogger Bank wind farm in which Statoil is a partner, through the industry consortium Forewind.

"By taking part in Siemens' certification programme, we are learning more about this technology, and can eliminate teething troubles. It's also far easier to influence the design at an early stage," he explains.

Qualification

The trial project will have a Technology Qualification Period (TQP) of 17,000 hours, equivalent to two years' operation. The turbine is to be installed on a vacant space in the Havøygavlen wind farm and be fully integrated with the other turbines, and will therefore not require a new concession. 

"We have operated a wind farm at Havøygavlen for several years, and we know that this is a very demanding site. It will be a good benchmark for how this turbine will behave," he says.

Building know-how 

Statoil project manager Finn Teller points out where the new turbine will be erected at Havøygavlen in northern Norway. (Photo: Dag Myrestrand)Apart from concrete initiatives of this type, the programme "Bringing cost of offshore wind down" will focus on building expertise and understanding of the wind industry in general, and the supply chain and purchasing in particular.

The turbine will be installed starting on September 15, and after testing and commissioning has been completed, the turbine will become operational in the fourth quarter of 2010.

Facts about Havøygavlen 

• 16 wind turbines at Havøygavlen i MÃ¥søy municipality in Finnmark
• The world's northernmost wind farm
• Average annual wind speed is more than nine metres per second
• Annual production has varied between 60 – 90 gigawatthours (GWh)
• Energy equivalent to consumption of 5000-6000 Norwegian households
• Has been operational since 2002
• Statoil owns the company Arctic Wind AS which owns Havøygavlen wind farm


--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

9.08.2010

Solar Energy Control- Wire Mesh Systems

Untangling Daylighting and Mesh
by J. David Carduff
May 1, 2010




<span style="FONT-SIZE: 13px; FONT-FAMILY: Arial; WHITE-SPACE: pre; -webkit-border-horizontal-spacing: 2px; -webkit-border-vertical-spacing: 2px">GKD_Dayton Convention Center_3.jpg</span>
Escale mesh forms the Rotunda structure on the Dayton Convention Center in Ohio. The Rotunda provides an abundance of reflective surface area and plenty of open area as well, allowing visuals to vary greatly depending on time of day. Photo Courtesy of GKD-USA


"Light every building using the sky." That's the vision of the Daylight Collaborative, a program created by the Energy Center of Wisconsin to provide information on daylighting. It sounds implausible, perhaps. But then again, many of the most successful trends and inventions sounded far-fetched at one point. Think flying. Telephones. Cars. The Internet. As with these other endeavors, those who seek to mainstream daylighting need to "find the light," so to speak. Which is exactly what some architects, designers and product manufacturers are trying to do through the use of innovative products and technologies. One such product is woven metal mesh fabric, which when used for daylighting purposes has proven to save energy by reducing the use of artificial lighting and heat gain. For this reason, woven metal mesh fabrics have been on the cutting edge of daylighting technology throughout the world. That's forward thinking.

Let's take a look at the concept of daylighting. It seems simple enough: As buildings are illuminated by the sunlight, they are less dependent on electric lighting. And because sunlight produces less heat per unit of light than electric lights, buildings lit by sunlight have smaller cooling loads and don't require as much energy from HVAC systems. 


<span  style="font-family: Arial; font-size: 13px; white-space: pre; -webkit-border-horizontal-spacing: 2px; -webkit-border-vertical-spacing: 2px; ">GKD_Piper High School_1.jpg</span>
In addition to providing Piper High School, Kansas City, Kans., with daylighting and sunshading, the stainless-steel mesh provides durability, longevity and is virtually maintenance-free. Photo © Alistair Tutton  Photography
While the concept of daylighting is straightforward, successful implementation of the practice is more challenging. Daylighting requires creativity and expertise. "Good daylighting creates beautiful, appropriately lit spaces while saving energy. A successfully daylit building is the result of a combination of art and science, of architecture and engineering. It is the result of an integrated design process," according to www.daylighting.org. Daylighting is more than simply installing windows; it involves foresight, innovation and ingenuity. Not to mention planning -- planning is key.

During the planning process, consider all of the available materials that can help in successfully daylighting a building. As daylighting becomes an increasingly significant component of a building and a successful means of energy efficiency, more architects are integrating it into their designs. In a 2009 survey performed by GKD-USA, architects throughout the United States were asked how big a role daylighting played in the design of their buildings. Seventy-two percent of respondents said they always try to incorporate daylighting into their design, while 22 percent responded that the incorporation of daylighting was dependent upon the type of building. Because of this, building product manufacturers are developing a variety of new products to help the process, including woven metal mesh fabric. 


<span  style="font-family: Arial; font-size: 13px; white-space: pre; -webkit-border-horizontal-spacing: 2px; -webkit-border-vertical-spacing: 2px; ">GKD_UCSF_4.jpg</span>
Lamelle mesh provides classic daylighting for this University of California, San Francisco building. Photo Courtesy of GKD-USA
Aside from enhancing the aesthetics of a building, woven metal mesh offers a unique way to control solar heat gain and extreme daylight and is commonly used as a sunshade. Depending on the location of the building and type of heat and light a window is exposed to, different patterns and sizes of mesh can be utilized. When used for sunshading, mesh can help contribute to Leadership in Environmental and Energy Design (LEED) certification points.

The first to place flexible mesh on buildings, GKD recently began to explore ways in which their products could be further utilized. Through commissioning several studies and experiments, GKD found that woven metal mesh could indeed by used for daylighting purposes. While mesh can be used to block glare, GKD has also collaborated with ag4, a mediatecture company, to create Illumesh and Mediamesh -- high-grade architectural woven stainless steel mesh fabric with interwoven LED profiles. This unique product has been used to replace solid LED boards on buildings, allowing daylight to enter a building without obstructing interior views or exterior architecture. 


<span  style="font-family: Arial; font-size: 13px; white-space: pre; -webkit-border-horizontal-spacing: 2px; -webkit-border-vertical-spacing: 2px; ">GKD_UCSF_5.jpg</span>
216 panels of Lamelle mesh were used to cover 32,100 square feet of this University of California, San Francisco building.  Photo Courtesy of GKD-USA
Using woven metal mesh for daylighting purposes saves energy by reducing the use of artificial lighting as well as heat gain. At the request of GKD, a study of several metal mesh products from GKD was conducted by ift Rosenheim, an independent party research team. The purpose of the study was to determine the solar characteristics of metal meshes and to calculate solar heat gain of glazing in combination with solar shading devices. The materials tested were each of different thickness and design. Results showed that GKD woven metal fabric exhibits improved sun protection, which leads to reduction of required cooling loads and allows for smaller cooling generators and HVAC systems.

Daylighting is also valued for its benefits to building occupants. According towww.daylighting.org, recent studies show that daylighting creates a stimulating environment -- much better for occupants than the environment created by any type of artificial light. Natural light contributes to increased concentration among occupants and positively affects their emotional well-being and overall mood. Studies reveal that students in rooms lit by an increased amount of daylight consistently progress 20 percent faster in math and 26 percent faster in reading.

Time magazine discussed the way unlikely inventions became reality: "[Flight] did not come about by luck or accident. It was vision, quiet resolve and the application of scientific methodology that enabled Orville and Wilbur to carry the human race skyward." Likewise, a combination of vision, education and application will allow daylighting to become commonplace so that maybe one day, every building will be lit using the sky.  


J. David Carduff
J. David Carduff is the product manager for GKD-USA. Having spent the past 28 years in the technical metal weaving and forming business, Carduff is an expert in the benefits of woven metal mesh. 


--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

350.org- I'm going to the White House.




Build Green
Scotty, Scotts Contracting
www.stlouisrenewableenergy.com
www.stlouisrenewableenergy.blogspot.com





--- On Wed, 9/8/10, Bill McKibben - 350.org <organizers@350.org> wrote:

From: Bill McKibben - 350.org <organizers@350.org>


350.org is taking solar back to the White House. Literally.

We're hauling solar panels to Washington DC and inviting President Obama to join the world on 10/10/10.

But President Obama needs to know that he won't be alone on 10/10/10, so start or join an event:

www.350.org/start

www.350.org/join

Dear Friends-
 
Well, I'm getting to work a few weeks ahead of 10-10-10, and wanted to send along the story to get you fired up for the big day.
 
I'm trying to type this as the biodiesel van I'm sitting in bumps down the highway in rural Maine. We left tiny Unity College yesterday morning, bound for the White House with stops in Boston and New York -- and we're carrying a piece of history with us.
 
It's one of the solar panels that President Jimmy Carter installed on the roof of the White House in 1979, 31 long years ago. Here's what Carter said that day: "A generation from now this solar heater can either be a curiosity, a museum piece, an example of a road not taken, or it can be just a small part of one of the greatest and most exciting adventures ever undertaken by the American people."
 
Sadly, the panels were taken down a few years later in the Reagan administration. Not because they stopped working -- but because we stopped thinking carefully about the future. The folks at Unity College salvaged them from a government warehouse and put them on the roof of the cafeteria, where they still work fine.
 
But now they've agreed to donate one back to the White House, in the hope that it will spur Obama to pick up where Carter left off.
 
Our great hope, of course, is that on 10-10-10 President Obama will be up there on the roof, helping to put the panels in place. Our friends at the solar company Sungevity have even offered to donate a massive, brand new solar array for free. (Mohamed Nasheed, president of the Maldives, has already taken them up on the offer -- he'll be up on his roof on 10-10-10 hammering in a new set of panels).
 
But so far, there's no definitive answer from the White House. They say they're "interested," but that it's "complicated."
 
Here's how you can tip the balance: in the next 24 hours, we're going to get back on the phone with the White House and work to convince them to commit to taking action on 10-10-10. It would greatly strengthen our hand to say that hundreds of people have registered new work parties since we last called.

Can you help by registering an event in your community or forwarding this email to friends encouraging them to Get to Work on 10/10/10?

We'll keep you updated on our Solar Road Trip blog on how negotiations with the White House go and how many actions get signed up over the next 24 hours. Together, we can send President Obama and all politicians a clear message: we're getting to work, now it's time for you to do your part.
 
In the end, we can't completely control what the White House, or any other political leader does. We can control what happens in our communities, and we can use our own efforts to put more political pressure on our leaders.
 
With events already scheduled in over 140 countries, 10/10/10 is shaping up to be huge -- but it needs to be massive to create enough pressure to really count.

Please help lead this movement, and get involved in 10/10/10 today.

Onwards,

Bill McKibben for The 350.org Team

P.S. As you know, we're focused on 10/10/10 for the moment, but we're also thinking long-term about how to change the dynamics in the USA. We're thinking about lots of strategies, including direct action -- but we need your help and ideas. Please take a moment to read this piece I just co-wrote at Grist.org: http://www.grist.org/article/2010-09-05-call-for-direct-action-in-climate-movement-we-need-your-ideas

P.P.S Can you take a moment to inspire your friends to join you on 10/10/10, with a few clicks on Twitter & Facebook?



You should join 350.org on Facebook by becoming a fan of our page at facebook.com/350org and follow us on twitter by visiting twitter.com/350

To join our list (maybe a friend forwarded you this e-mail) visit
www.350.org/signup

350.org needs your help! To support our work, donate securely online at
350.org/donate



350.org is an international grassroots campaign that aims to mobilize a global climate movement united by a common call to action. By spreading an understanding of the science and a shared vision for a fair policy, we will ensure that the world creates bold and equitable solutions to the climate crisis. 350.org is an independent and not-for-profit project.

What is 350?
350 is the number that leading scientists say is the safe upper limit for carbon dioxide in our atmosphere. Scientists measure carbon dioxide in "parts per million" (ppm), so 350ppm is the number humanity needs to get below as soon as possible to avoid runaway climate change. To get there, we need a different kind of PPM-a "people powered movement" that is made of people like you in every corner of the planet.


Illinois Solar Power Law-Enacted Aug 2010

Illinois Laws Boost Solar Power Use for Utilities, Individuals

August 30, 2010

Illinois Governor Pat Quinn on August 17 signed legislation that boosts the use of solar power by individuals and by state utilities. One law requires the two state utilities, Commonwealth Edison and Ameren, begin purchasing solar power as part of their renewable energy portfolios starting in 2012, three years earlier than previously required by state statute. Specifically, the utilities will now be required to purchase 0.5% of their power from solar sources by June 1, 2012; 1.5% by June 1, 2013; 3% by June 1, 2014; and 6% by June 1, 2015.

A second measure signed into law creates the Homeowners' Solar Energy Act to ensure individual homeowners have the right to construct solar energy panels on their homes, provided the individual homeowners follow certain guidelines. Under the new law, homeowner's associations cannot prohibit homeowners from installing solar panels on their property. The goal of both laws is to reduce dependence on foreign oil while cutting greenhouse gas emissions. See the governor's press release Copied below.


CHICAGO – August 17, 2010. Governor Pat Quinn today signed legislation that promotes energy independence by furthering the use of solar power by individuals and by industry. The new laws establish strengthened targets for utilities that will be purchasing more solar energy and help homeowners who want to increase their solar energy usage.

"Solar energy is the wave of the future, and it is important that our public utilities and homeowners are able to more easily increase their use of solar energy," said Governor Quinn. "We must do everything we can to increase our use of solar energy, which will help us protect natural resources and reduce our reliance on traditional energy sources, such as foreign oil."

House Bill 6202, sponsored by Rep. William Burns (D-Chicago) and Sen. Don Harmon (D-Oak Park), amends both the Illinois Power Agency Act and the Public Utilities Act to change the date by which Commonwealth Edison and Ameren must begin purchasing solar energy as part of the renewable energy portfolio requirement. The new law changes the date to 2012, which is three years earlier than the previous 2015 deadline.

Specifically, the power industry will now be required to purchase .5 percent of its power from solar sources by June 1, 2012; 1.5 percent by June 1, 2013; 3 percent by June 1, 2014; and 6 percent by June 1, 2015, and each year thereafter.

House Bill 5429, sponsored by Rep. Sara Feigenholtz (D-Chicago) and Sen. Michael Noland (D-Elgin), creates the Homeowners' Solar Energy Act to ensure the right of individual homeowners to construct solar energy panels on their homes, provided the individual homeowners follow certain guidelines. Under the new law, homeowner's associations cannot prohibit homeowners from installing solar panels on their property.

Governor Quinn signed both pieces of legislation at the University of Illinois at Chicago. House Bill 6202 takes effect immediately and House Bill 5429 will take effect Jan. 1, 2011.

Solar power uses the energy from sunlight to generate electricity. Solar energy can be used in smaller, residential settings, and in recent years, multi-megawatt plants have been built.


--
Scott's Contracting
scottscontracting@gmail.com
http://www.stlouisrenewableenergy.blogspot.com
http://www.stlouisrenewableenergy.com
scotty@stlouisrenewableenergy.com

Insulation-If Walls Could Talk Part 1

If Walls Could Talk

Insulation: A tougher code necessitates more remodeling training

Roofing & Insulation
Credit Available30% of cost (product only, no labor)
$1,500 maximum for all improvements combined
TimelineMust be "placed in service" (ready and available for use)
Jan. 1, 2009 – Dec. 31, 2010
Requirements
Metal and Asphalt RoofsEnergy Star–qualified
InsulationMeets 2009 IECC & Amendments
Must be expected to last five years or have a two-year warranty
Primary purpose must be to insulate. As of May 31, 2009, IRS has not ruled on SIPs or insulated siding, but it is believed that SIPs are eligible
Provided by Scotts Contracting 


Dollar for dollar, insulation and weatherization deliver more bang for their energy-efficiency buck than almost any home improvement. Happily for manufacturers and installers, the American Recovery and Reinvestment Act's $1,500 tax credit can be applied, in theory, to a broad array of materials and methods — batts, spray foam, loose-fill; wraps, sealants, tapes, and flashing; even structural insulated panels — that are primarily designed to reduce the heat loss or gain of the nation's estimated 80 million underinsulated homes.
On its surface, the insulation provision is simple: Homeowners can take a tax credit of 30% of the cost of materials only, to a maximum of $1,500, for insulation work performed this year and next. That's triple the credit available since 2005. The sum of the resulting "insulation material used in layers" must meet the R-values prescribed by the 2009 International Energy Conservation Code (IECC).

"We think the recovery bill is a great opportunity to move forward" toward a more energy-efficient housing stock, says Gary Nieman, vice president of government policy initiatives at Owens Corning, feature one of several insulation manufacturers that were interviewed for this article.

Guardian Building Products' "customer base has expressed heavy interest in several areas of the ARRA," says Aaron Hock, national sales manager.
Code of Conduct

More on the Building Envelope

Things start to get sticky with the IECC. Published by the International Code Council (ICC) and based on goals set by the U.S. Department of Energy, the 2009 IECC will produce 15% in energy-efficiency gains over the 2006 version, according to the DOE. (To purchase the 2009 IECC, go to www.iccsafe.org.

Regarding insulation, the 2009 IECC is considerably tougher than the previous version, particularly in colder parts of the country, where R-values (thermal resistance) are now as high as 21 for wood frame walls, 38 for floors, and 49 for ceilings and attics. "The new code requirements make it tough for builders to do things as usual and still meet the code," says Bob Burgess, president of Accurate Insulation, in Upper Marlboro, Md., whose 65 installers work all over the mid-Atlantic region. This is especially true in remodeling, when insulation is sometimes compressed into small cavities, potentially compromising R-value.

Numerous products meet the specified R-values, including fiberglass and cotton batt insulation with ratings of R-21 or higher that can be installed in a 2x6-framed wall cavity, plus several loose-fill products using fiberglass, cellulose, or other materials that can be installed behind netting in open framing or used to fill cavities in existing walls.

Such products likely won't be as inexpensive as the old mainstays, however, or necessarily prove as easy to find, at least based on a few calls to building supply retailers.

In some cases, in fact, meeting the prescribed R-values becomes almost cost-prohibitive. Ironically, it may even deter homeowners from choosing what many green remodeling advocates believe are the best (but most expensive) insulating products: water-based spray foams that expand to fill gaps and holes.

"They're speaking batt language," says Laura Calfayan of Calfayan Construction and AirTight SprayFoam of Southeastern PA, in Huntingdon Valley. "If I were to spray R-38, I'm literally forcing people to spend more than they need to," she says, to achieve the same comfort effects that can be achieved with 2 inches of AirTight's water-based, closed-cell foam, whose continuous air barrier reduces energy use beyond its stated R-value of 7 per inch.

Even so, business is up for spray foam companies. An Icynene product, for example, has a 3.7-per-inch R-value, allowing 2x6 walls insulated with it to meet the 2009 IECC in zones that require R-20.
By mid-April, downloads of the Icynene manufacturer's certification statement (needed for tax documentation purposes) had risen by 68% since January, according to Teresa Crosato, the company's marketing communications supervisor.

If homeowners must dig a bit deeper at the point of sale, that's the price of progress, says Darren Meyers, technical director of energy programs with the ICC. "[The 2009 IECC] is a paradigm shift because the nation and the home-building community have not understood how far behind our construction practices are. We've never had a call to action [to be very energy efficient]," he says. The DOE's goals, and the resulting code, are the call to action.


--
contact for additional details-->Scott's Contracting
scottscontracting@gmail.com

Connect with Scotts Contracting

FB FB Twitter LinkedIn Blog Blog Blog Blog Pinterest

Featured Post

Perfect Aircrete, Kitchen Ingredients.